Focke Wulf Ta 154

Design & Development

Kurt Tank's team at Focke-Wulf had been working for some time on a fast attack-bomber aircraft named Ta 211, so named because it planned to use an uprated Jumo 211R engine. The intended "Ta 211" design was a high-wing twin-engined design, built primarily of plywood, bonded with a special phenolic resin adhesive called Tego film. The only large-scale use of metal was in the pressurized cockpit.

The project's designation was changed to Reichsluftfahrtministerium (RLM—Ministry of Aviation) airframe number 8-154 (hence Ta 154) when it became apparent that the most suitable engine for the aircraft was the more powerful Jumo 213, and that Junkers could not deliver the Jumo 211R in time due to technical and production problems. The 154 was also allocated the name "Moskito" as a form of recognition of the Royal Air Force's (RAF) de Havilland Mosquito.

It was at about this time that the light and very fast de Havilland Mosquito, also made of wood, arrived over Germany. It quickly racked up an impressive record; in its first 600 bombing missions, only one was shot down, compared to an average of 5% for RAF medium and heavy bombers. Erhard Milch personally requested a purpose-built German answer, and selected the 154. Infighting within German circles started almost immediately, because the RLM and night fighter units — as well as Ernst Heinkel himself — still wanted the Heinkel He 219. Milch took this personally, and spent the better part of the next two years trying to have the 219 program terminated, partly against Ernst Heinkel's wishes.

Flight tests

Development of the Ta 154 was already well advanced, and the first prototype V1 with Jumo 211F engines, bearing the Stammkennzeichen identification code TE+FE, made its maiden flight on July 1, 1943. It was followed by V2 with Jumo 211N engines, which was kept at the factory for handling trials. V1 was then sent to Rechlin-Lärz Airfield for fly-off testing against the He 219A and the new Junkers Ju 388. There the 154 reached almost 700 km/h (440 mph) and easily outflew the other two aircraft, but those were both fully armed and equipped with radar.

The first armed example of the Ta 154 was the V3 prototype, which was also the first to fit the Jumo 211R engines. The added weight of the guns and drag of the 32-dipole element Matratze radar antennas used on its UHF-band FuG 212 C-1 Lichtenstein radar unit slowed the aircraft by a full 75 km/h, although it was still somewhat faster than the He 219. The rest of the 15 prototypes were then delivered as A-0 models, identical to the V3. Some of these also included a raised canopy for better vision to the rear.

By June 1944, the Jumo 213 was finally arriving in some numbers, and a production run of 154 A-1s was completed with these engines. Just prior to delivery[citation needed] the only factory making Tego-Film, in Wuppertal, was bombed out by the Royal Air Force, and the plywood glue had to be replaced by one that was not as strong, and was later found to react chemically, apparently in a corrosive manner, with the wood in the Ta 154's structure. In July, several A-1s crashed with wing failure due to plywood delamination. This same problem also critically affected the Heinkel He 162 Spatz, Ernst Heinkel's "Volksjäger" jet fighter program entry.

Tank halted production in August, and the RLM eventually cancelled the entire project in September (Milch had been removed by then). At that time about 50 production aircraft had been completed, and a number of the A-0 preproduction aircraft were later modified to production standard. An unknown number of the aircraft served with Nachtjagdgeschwader 3, and a few were later used as training aircraft for jet pilots.