Siebel Si 204

The Si 204 was planned as a small all-metal passenger aircraft with two crew and eight passengers for German airline Deutsche Luft Hansa (DLH). Development was initiated in 1938. The contractor was, as usual, the RLM, but the development was conducted in close collaboration between DLH and Siebel in Halle.

After the beginning of the war, the aircraft was redesigned as a trainer aircraft with a full "stepless" glass cockpit, as had been initiated with the He 111P in early 1938, with no separate flat windscreen for the pilot (much as almost all German bomber aircraft of the time were being designed), which seemed to be better for blind flying in the Si 204's case.

The first two prototypes only were delivered as passenger aircraft with the old cockpit. The maiden flight of the first prototype was before September 1940, possibly on 25 May 1940, that of the second prototype before February 1941. The third prototype was redesigned as a trainer aircraft for blind flying. As a result of this, the maiden flight was not earlier than the end of 1941 or the beginning of 1942.

At that time, Siebel produced the Junkers Ju 88 under licence, so only 15 prototypes were able to be built in Halle. As a result, Société Nationale de Constructions Aéronautiques du Nord (SNCAN) in France produced the A-0 preseries A-1 production passenger aircraft between April 1942 and November 1943.

Českomoravská Kolben-Daněk (ČKD, called Böhmisch-Mährische Maschinenfabrik AG [BMM] in German) in the Protectorate of Bohemia and Moravia delivered the first blind flying trainer D-0 in January 1943 followed by production of a further 44 D-0 preseries aircraft. The D-1 series was begun in March 1943 by Aero, also in the Protectorate, and by BMM in June or July 1943. In August 1943, SNCAN also delivered their first D-1.

Production of the D-3 was started in October 1944 by Aero Vodochody. The D-3 had wooden wings and a tail-plane made of wood and metal. French production of the D-1 was ended in August 1944 after the Liberation. SNCAN produced a total of 168 units of the Si 204. BMM produced the aircraft until October 1944 and then changed to producing spare parts for the Si 204. The Aero company was scheduled to cease production of the D-1 in March 1945 after building 486 aircraft and then switch to D-3 only. The aircraft, however, was only built until January 1945 with 541 completed.

Therefore, total production was 1,216 (until January 1945) including the prototypes; some production in other countries continued after the war ended.

Sources:
Gunston, Bill & Wood, Tony - Hitler's Luftwaffe, 1977, Salamander Books Ltd., London
Wikipedia: Siebel Si 204